How to make your own Nuvox 2X6K TV with Raspberry Pi 2 and an Arduino, and Arduino Uno 3D printer

This article is part of our contributor series.

The views expressed are the author’s own and not necessarily shared by TNW.

Read moreAbout this seriesThis post is part 1 of our 1-part series on making your own Raspberry Pi TV using the Nuvax 2X series of TV receivers. 

You can read more about this series here.

The Raspberry Pi was designed as a low-power, compact computer that could easily be used in an office environment, or on a travel device. 

It’s easy to build and can be controlled via a simple Raspberry Pi 3. 

Nuvax sold its last TV receiver in 2012, but the company is hoping to make it a viable option for the average consumer. 

The company has released the Novell Nuvix TV Receiver, a Raspberry Pi powered TV receiver that you can use on any device that can display a standard 1080p or 1080p/60p image. 

There are two parts to the receiver, which you can buy separately or together.

The first is the Nvax TV Receiver itself. 

While it has a 4.5-inch screen and can display 1080p, 720p and 480p images, it doesn’t have any kind of HDMI output. 

Instead, it has an external HDMI port that you plug into your TV’s HDMI port, and it outputs the image to an SD card that can be shared with your computer. 

With that, you can edit the image in any software that supports SD cards, including Adobe Photoshop, Dreamweaver, Photoshop Elements, etc. I’ve included a screenshot of the Novax TV receiver for your viewing pleasure.

The Noveldesay Nuvx TV receiver has a 5.5″ screen that displays 1080p video and 720p video. 

This means that the display is fully capable of displaying 1080p and 720px, but it can’t display full resolution 1080p videos. 

For this reason, I’m using a 1920×1080 pixel resolution for this article, so you’ll see a little bit of pixelation. 

That’s a bit of a shame, because the Nubre HD TV (which also has a 1080p screen) is the only HD TV I’ve tested so far that doesn’t display pixels at all. 

In fact, the Nova Nova TV (a Roku TV that has a 720p screen, but only 1080p content) was the only TV I used in this review to display 1080P content. 

To make sure I could get a full 1080p experience on the Nubes, I’ve had to use an external projector and a projector with a 1080i resolution, which are both not available for this receiver. 

However, this isn’t a problem for anyone that wants to watch a 1080P or 720P video, as you can stream the 1080p to your computer and then export it to a 4K TV file. 

So if you’re interested in playing 1080p 720p videos, you’re better off getting an external 1080p projector or projector with 1080i. 

But if you do want to stream 1080p images to your PC or TV, you won’t need an external 720p projector and/or a projector that only supports 1080p. 

If you want to get full 1080i video, you’ll need a projector or a projector capable of 720p at 30 frames per second. 

My recommendation for the Nube HD TV is the Roku TV 4K.

The Roku TV has a 1920 x 1080 resolution, and you can export your full 1080 video to it as a 4k file.

You can also use the Roku to stream your 4K video to the Nubs, which is a great feature if you want a 4G mobile streaming device that you’re not tethered to. 

Of course, if you already own a Roku, you don’t need to buy a Roku 4K at all, but if you are buying one of the other Roku TVs, you probably want to upgrade.

The other part of the receiver is the Arduino UnO 3D Printer. 

Using the Nucs’ TV receiver, you simply attach the Raspberry Pi to the TV receiver’s USB port, then plug in the NUVX. 

Once the Raspberry is connected, you plug it into the NVAX and start building. 

As you can see, the Raspberry has a very simple GUI. 

Since the Nuke TV doesn’t use the same Raspberry Pi’s GPIO pins, you need to add the following to your code:void setup(){ pinMode(NVAX,OUTPUT); pinMode_reset(PIN_UPSHOT); } void loop(){ // The Raspberry Pi uses a few GPIO pins to control the Nukes GPIO.

void setup() { GPIO.begin(96